MP: 1 "The VAS Convergence Foregrip remains locked on new Season 04 Weapons." 2 "Players are returned to the lobby when selecting or highlighting the Fang Hoverpoint ELO sight in the Armory."
For those of us seeing blurb about attestation in Warzone matchmaking.....
Quote:
this is important
.
We were thinking it was an unintentional error message but it turns out it is part of the new wonderful anti cheat thing and requires both tpm and secure boot to be enabled. (I'll admit I thought windows 11 had that as prerequisites but hey ho.)
To check secure boot is enabled is easy
Hit the windows key and R to bring up the Run Dialogue.
Type in (without the quotes) "msinfo32" and press enter
In the System Summary pane, locate Secure Boot State
On : Secure Boot is enabled
Off: Secure Boot is disabled
Unsupported: Your PC does not support Secure Boot (likely using Legacy BIOS or an older drive format)
to check if tpm is enabled
do the same thing to bring up the Run Dialogue
Type in tpm.msc
If you see "The TPM is ready for use" and the Specification Version says 2.0, it is enabled
If either of these two things comes back negative they your system is why the attestation thing is coming up and it means the party gets slotted into a less secure match play area so don't be surprised if there are more cheats in there with you.
Lucky, i wrongly told you i had an MSI board but its an Asus sorry. great tutorial... unfortunately my Asus b550 bios cannot be got into because it is passworded, either from start-up or thru windows. it is a well known fault that i cannot resolve:(
Lucky, i wrongly told you i had an MSI board but its an Asus sorry. great tutorial... unfortunately my Asus b550 bios cannot be got into because it is passworded, either from start-up or thru windows. it is a well known fault that i cannot resolve:(
Bullitt I've had a search, someone suggested this:
"Go into the bios, click the security tab, do the option to change the password. When is asks for the new password hit "spacebar" then "enter". It will then ask if you want to clear the password and you can click yes. This worked for the user password, should work for the Admin password as well."
Failing that, you should be able to clear the CMOS either by shorting the 2 CLRTC pins on the MOBO, or removing the CMOS battery. You might even have a Clear CMOS button on the MOBO.
Users browsing this forum: No registered users and 17 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
